BlueTree 5000 Manual de usuario descargar pdf (Pagina 80)

10.7 +BUSBIP: Modem’s IP Settings Over USB NDIS Connection

Description

This command sets the modem’s IP address as seen over the USB NDIS interface by the

attached host as well as the IP address that gets assigned by the modem to the attached host. It

also configures the local network subnet mask formed by the USB NDIS connection.

Availability

Since FW version 3.0.0

Command Syntax

AT+BUSBIP=<index>,"<Modem IP>","<Host IP>","<Subnet Mask>"

Response Syntax

+BUSBIP: <index>,"< Modem IP >","<Host IP >","<Subnet Mask>"

Defined Values

<Index>

1 This is for future use. Must be set to ‘1’ for now

nnn.nnn.nnn.nnn IP address of the modem as seen by the attached host

nnn.nnn.nnn.nnn IP address assigned by the modem to the attached host

nnn.nnn.nnn.nnn IP address subnet mask

Example:

Commands Responses

AT+BUSBIP? +BUSBIP:1,"192.168.1.1","192.168.1.2","255.255.255.0"

AT+BUSBIP=1,"192.168.1.1","192.168.1.2","255.255.255.0" OK

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 129 130

Sin comentarios

BlueTree 5000 Manual de usuario Pagina 80