BlueTree 5000 Manual de usuario descargar pdf (Pagina 21)

3.11 &C: Set DCD Signal

Description

This command is used to control the Data Carrier Detect (DCD) signal on the serial port.

Availability

Since FW version 1.1.1

Command Syntax

AT&C[<Action>]

Response Syntax

Defined Values

0 force DCD signal to be Always-On

1 DCD follows connection state as per the specified service (default)

2 force DCD signal to be Always-On and wink it on channel disconnect

Example:

Commands Responses

AT&C2 OK

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 129 130

Sin comentarios

BlueTree 5000 Manual de usuario Pagina 21