BlueTree 5000 Manual de usuario descargar pdf (Pagina 45)

Inicio
BlueTree
Redes
5000
Manual de usuario

Descarga
Compartir

Compartiendo
Añadir a mis manuales
Imprimir

4.2 +BSERAO: Serial Port Always-On

Description

This command is used to configure whether the serial port device shall go into sleep mode when

no activity is detected on the serial port (no signal on DTR, Tx and RTS) or remain always on.

Availability

Since FW version 3.3.0

Command Syntax

AT+BSERAO=<action>

Response Syntax

+BSERAO: <action>

Defined Values

0 Disable; the serial port may go into sleep mode.

1 Enable (default); the serial port is always-on.

Example

Commands Responses

AT+BSERAO? +BSERAO: 1

AT+BSERAO=0 OK

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 129 130

CDMA/GSM 1
1 Introduction 8
3 Basic Commands 10
3.3 E: Echo Sent Commands 13
3.5 H: Hang-up 15
3.8 S0: Automatic Answer 18
3.9 V: Result Codes Format 19
3.11 &C: Set DCD Signal 21
3.12 &D: Set DTR Signal 22
3.23 +CSS: Serving System 35
3.29 +CCLK: Clock Management 43
4 User serial port setup 44
5.4 +GMM: Modem Model 49
6 Modem Initialization 55
13 Serial-IP Configuration 93

Comentarios a estos manuales

Sin comentarios

BlueTree 5000 Manual de usuario Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Redes BlueTree 5000