BlueTree 5000 Guía de usuario descargar pdf (Pagina 52)

 DC 2.5mm round plug for all models except the BT-5x00v2 series

 PoE (Power over Ethernet) for BT-6x01EB models

WARNING

DC 2.5mm Barrel Adapter shall not be used in hazardous locations.

11.7.1 Powering up the modem

The modem will power up as soon as an 8 to 30 VDC voltage is applied to one of its power inputs and shuts off when this

input voltage is below 4 VDC.

In addition, BT-5x00v2 modems require the IGN signal to be ON for the modem to start. When BT-5x00v2 modems

detect the IGN signal transition to OFF, it engages its shutdown after a programmable delay.

11.7.2 Testing the power connection

Check the PWR light on the modem: if it is turned on then the modem is powered. If it’s off, then review the installation

procedures.

If LED indicators are not accessible to the installer, a computer can be used to verify its functionality by running BlueVue

Device Manager and attempting to connect to the modem.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 68 69

Sin comentarios

BlueTree 5000 Guía de usuario Pagina 52